ASML Holding
· ASML
April 16th, 2025
Summary
Financial Performance
- Q4 net sales reached €9.3 billion a significant increase.
- Net system sales amounted to €7.1 billion with EUV sales contributing €2.9 billion.
- Installed Base Management sales reached €2.1 billion.
- Gross margin remained strong at 51.7%.
- Net income reached €2.7 billion resulting in an EPS of €6.85.
Business Highlights
- High NA EUV systems have been successfully installed and accepted by customers.
- Customers have provided positive feedback on the performance of High NA EUV systems.
- Demand for EUV Logic remains strong driven by the growth of AI.
- Memory demand continues to be robust.
- The Installed Base business is expected to experience growth.
Future Outlook
- Bookings reporting will be discontinued after 2025 with total systems backlog reported annually.
- 2025 revenue guidance is set between €30 billion and €35 billion.
- 2025 gross margin guidance is expected to be within 51% and 53%.
- The 2030 revenue opportunity is estimated to range from €44 billion to €60 billion.
- Gross margins are projected to be between 56% and 66% in 2030.
Additional Insights
- Order intake can fluctuate due to the high cost of tools.
- Market reactions to order intake can be significant.
- Geopolitical risks and customer pushouts could impact guidance.
- AI demand is driving growth in the industry.
- The shift towards HPC and HBM products requires more advanced lithography.
Operator
Good day, and thank you for standing by. Welcome to the ASML 2025 First Quarter Financial Results Conference Call on April 16, 2025. At this time, all participants are in a listen-only mode. After the speaker's introduction, there'll be a question-and-answer session. [Operator Instructions] Please be advised that today's conference is being recorded. I would now like to turn the conference call over to Mr. Jim Kavanagh. Please go ahead.
Jim Kavanagh
Thank you, operator. Welcome, everyone. This is Jim Kavanagh, Vice President of Investor Relations at ASML. Joining me today on the call are ASML's CEO, Christophe Fouquet; and our CFO, Roger Dassen. The subject of today's call is ASML's 2025 first quarter results. The length of this call will be 60 minutes and questions will be taken in the order that they are received. This call is also being broadcast live over the Internet at www.asml.com. A transcript of management's opening remarks and a replay of the call will be available on our website shortly following the conclusion of this call.
Before we begin, I would like to caution listeners that comments made by management during this conference call will include forward-looking statements within the meaning of the Federal Securities Law. These forward-looking statements involve material risks and uncertainties. For a discussion of risk factors, I encourage you to review the Safe Harbor statement contained in today's press release and presentation found on our website at www.asml.com and in ASML's annual report on Form 20-F and other documents as filed to the Securities and Exchange Commission. With that, I would like to turn the call over to Christophe Fouquet for a brief introduction.
Christophe Fouquet
Thank you, Jim. Welcome, everyone, and thank you for joining us for our first quarter 2025 results conference call. Before we begin our Q&A session, Roger and I would like to provide an overview and some commentary on the first quarter results, as well as provide some additional comments on the current business environment and on our future business outlook. Roger?
Roger Dassen
Thank you, Christophe, and welcome everyone. Let me start with our first quarter accomplishments. In the first quarter of 2025, total net sales were EUR7.7 billion, in line with our guidance. Net system sales were at EUR5.7 billion, which includes EUR3.2 billion from EUV sales and EUR2.5 billion from non-EUV sales. Net system sales were driven by Logic at 58% and the remaining 42% coming from Memory. Installed Base Management sales for the quarter came in at EUR2.0 billion. Gross margin for the quarter was above guidance at 54%, driven by achieving customer productivity milestones on already installed EUV systems, as well as a favorable EUV product mix and enriched configuration resulting in higher ASP's. Operating expenses were in line with guidance with R&D expenses at EUR1.161 billion and SG&A expenses at EUR281 million.
The effective tax rate for Q1 was 16.7%. For 2025 we expect an annualized effective tax rate of around 17%. Net income in Q1 was EUR2.4 billion, representing 30.4% of total net sales and resulting in an earnings per share of EUR6. Turning to the balance sheet. We ended the first quarter with cash, cash equivalents and short-term investments at a level of EUR9.1 billion. After the very strong free cash flow generation in Q4, we ended Q1 with a free cash flow of minus EUR475 million, due to a combination of customer payment and downpayment dynamics and continued investments in fixed assets for future capacity. Moving to the order book. Q1 net system bookings came in at EUR3.9 billion, which is made up of EUR1.2 billion of EUV and rounded EUR2.8 billion of non-EUV.
Net system bookings in the quarter were weighted towards Logic at 60% of the bookings while Memory accounted for the remaining 40%. In Q1, ASML paid the third quarterly interim dividend over 2024 of EUR1.52 per ordinary share. Recognizing the three interim dividends of EUR1.52 per ordinary share each, paid in 2024 and 2025, with a final dividend proposal to the Annual General Meeting of EUR1.84 per ordinary share, this would result in a total dividend for the year 2024 of EUR6.40 per ordinary share. In Q1 2025 we purchased shares for a total amount of around EUR2.7 billion. With that, I would like to turn the call back over to Christophe.
Christophe Fouquet
Thank you, Roger. As Roger has highlighted, we started 2025 with good first quarter financial results. Turning to the markets, and consistent with our view from last quarter, the growth in Artificial Intelligence remains the key driver for growth in our industry. If AI demand continues to be strong, and customers are successful in bringing on additional capacity to support that demand, there is potential opportunity towards the upper end of our range. On the other hand, there is still quite some uncertainty for a number of our customers that can lead to the lower end of our range. We continue to see revenue from Logic increasing in comparison to 2024 with the ramp of leading-edge nodes and we expect Memory revenue to remain strong similar to 2024. Installed Base Management revenue is expected to grow in comparison to 2024. This is driven by increasing service levels as our installed base grows, an increasing contribution from EUV and an increase in revenue from our upgrade business.
Regarding recently announced tariffs, discussions are just starting and are very dynamic, the end state will be unknown for a while and until then the potential impact on our customers, suppliers and ASML will continue to be unclear and will continue to evolve. Roger will provide more detail, but it is clear that uncertainty is increasing in the macro environment as reported by many experts and businesses. With that caveat, we continue to expect revenue of between EUR30 billion and EUR35 billion for 2025 and continue to expect 2026 to be a growth year. With that, I ask Roger to provide some insights about how we are looking at the recent tariff announcements. Roger?
Roger Dassen
Thanks, Christophe. As Christophe highlighted, we are currently facing an elevated level of uncertainty surrounding tariffs, which may have both direct and indirect implications for our business. The total direct impact results from tariffs related to a number of areas, including new system sales and upgrades to our U.S. customers, the import of material for our U.S. manufacturing facilities, the import of parts and tools for our U.S. field operations, and finally, imports of parts from the U.S. into other countries to the extent tariffs applied to those parts. We are working with our customers and suppliers to try to achieve that any direct impact of tariffs on our results is limited.
As Christophe said, the tariff discussion is still very dynamic. The potential indirect impact on end market demand is even more complex and impossible to determine at this stage. With that, I would like to turn to our expectations for the second quarter of 2025. We expect Q2 total net sales to be between EUR7.2 billion and EUR7.7 billion. We expect our Q2 Installed Base Management sales to be around EUR2 billion. Gross margin for Q2 is expected to be between 50% and 53%. The bandwidth for gross margin is larger than usual, given the uncertainty around the scope and size of the tariffs, and the value chain absorption of tariffs for the quarter. The expected R&D expenses for Q2 are around EUR1.1 billion, and SG&A is expected to be around EUR300 million.
The gross margin in the second half of the year is expected to be lower than the first half, primarily due to the expected margin dilutive effect of the revenue recognition of High-NA systems in the second half of the year, lower upgrade revenue, as well as any potential impact of tariffs. For the full year, we continue to expect a gross margin between 51% and 53%, of course, with the caveat of the certainties around tariffs that we discussed before. With that, again, I turn it back over to Christophe.
Christophe Fouquet
Thank you, Roger. Turning to technology. In EUV, we have achieved some important milestones on both the Low NA and the High NA platforms. These are critical steps in providing a comprehensive EUV product portfolio that offers the necessary flexibility to support our customers' roadmap requirements and optimize their cost of technology. Let me first update you on our Low NA NXE
Jim Kavanagh
Thank you, Roger, and thank you, Christophe. The operator will now instruct you momentarily on the protocol for the Q&A session. Beforehand, I would like to ask that you kindly limit yourself to one question with a short follow-up, if necessary. This will allow us to get to as many callers as possible. Now operator, could you -- could we have your final instructions and then your first question, please?
Operator
Thank you. [Operator Instructions] And your first question comes from the line of Francois Bouvignies from UBS. Please go ahead.
Francois-Xavier Bouvignies
Thank you very much. My first question would be on High NA. So you have been doing a lot of work and very promising in terms of breakthrough and technology developments like, you described, Christophe. So I know you are working on this common platform to help on the cost side. But obviously, like you described, it's a question of cost of ownership versus multi-patterning. So cost performance benefits where they're going to make the decision. And with that in mind, I was wondering, if you would consider some flexibility around the pricing of High NA to facilitate adoption, I mean, to help your customers decide more quicker, if that makes sense. So I was wondering, if it's something you consider at all, at the moment, the pricing of High NA to help the adoption.
Christophe Fouquet
Well, Francois, thank you. It's a good question. I think you remind everyone that indeed, in general, single expose lithography will be better for customers than multi-patterning. I mentioned that this typically lead to process simplification, improvement, cost reduction. So when it comes to any new lithography system, I think, of course, we want to drive the adoption of those tools as quickly as possible basically to get to single expose. We are still working on that, as you know, for Low NA, so that also typically takes some time. And of course, we're going to do the same for High NA. Now usually, the main reason to not adopt very quickly the new system fully for single expose is not the tool price, to be honest.
It's the tool maturity. And I think it's very important to get that maturity at the right level because, if not, you will set basically a cost of technology point that will be not very optimized. And this is why, not only I refer to maturity in my introduction, but you also heard me quoting a customer also making the case at SPIE that the maturity of High NA was by far ahead of the maturity of Low NA at a similar stage. So this is still the work we have to do. I mentioned the three phases. I think it's a major part of phase two. And I think if you look at the focus of ASML today with the customer on High NA is really to get this maturity in place as soon as possible, so that the adoption is there. Lowering the price at low maturity will just create too much headache for our customer because the tool will not be very reliable.
Francois-Xavier Bouvignies
Makes sense. Thank you, Christophe. And maybe my quick follow-up would be on the comment on single expose EUV that you start seeing, I mean, the adoption on more single expose versus multi-patterning , I guess, on Low NA that you are referring. Can you help us on the timing? You mentioned DRAM specifically that you see more adoption on single expose? I mean what timing should we look at this opportunity? If you start seeing it, I would imagine, it's a two years view you are talking about, or could it be quicker?
Christophe Fouquet
I think those things are happening, I will say, almost as we speak. So I think every new customer nodes where we bring basically a tool with a better cost of technology, such as the 3800E is an opportunity for more adoption. So I think this is, I would say, a permanent job that's something we have been working with our customer for a bit. I think the place we are today with Low NA EUV, the maturity of the tool, the step we do on productivity, remember, the 3800 is 30% faster than the 3600, I would say, really gives us a chance to be optimistic on that work with our customers in the coming years, but the work already started, Francois.
Francois-Xavier Bouvignies
Thank you very much.
Operator
Thank you. Your next question comes from the line of Krish Sankar from TD Cowen. Please go ahead.
Krish Sankar
Yeah. Thanks for taking my question. First one I have for Roger. I'm just kind of curious, you talked about growth next year. What kind of bookings run rate should we expect in the current and the next quarter to see the growth? And if calendar '25 ends up in the upper end of the range, would calendar '26 still be a growth year? And then I have a follow-up.
Roger Dassen
Yeah. So Krish, I'm not going to comment on the magnitude of the growth, as we already also said on the video. We still believe '26 to be a growth year based on our technology, based on the conversations we have with customers, based on the intrinsic market demand as we see it, with the caveat that we also talked about, which is the general macro climate. In terms of what bookings do we need to get there, I'm not going to go into any detail there. I think you can easily figure out what the backlog is today. I think you can easily figure out that there is a very significant part in the backlog that actually pertains to the period beyond 2025. So there is already a very good booking level, I would say, for next year. But of course, bookings still need to come in order to make the growth year and these happen so.
I think that's what we should see in the next quarters. But I'm not going to quantify it, also in light of the comment that we made before on the nature of the bookings and the extent to which it does not really reflect the business momentum always accurately of our business.
Krish Sankar
Got it. Okay, Roger. And then, as a quick follow-up, do you still expect China to land similar in the mid-20% of sales? And can you give any color on the backlog composition, how much is EUV, DEEP UV in China in that mix?
Roger Dassen
You broke up in the first part of the question. I couldn't understand it, Krish. Maybe you can repeat it.
Krish Sankar
Yeah. Sorry, Roger. I was trying to figure out, is China is still going to be around 25%, mid-20 percentage of sales this year. And any color on the composition of the backlog?
Roger Dassen
Understood. So yes, China -- we believe China will be a little bit over 25% of sales this year. As you know, in the previous call, we said its low 20s. The way we look at it today, the demand within DEEP UV is shifting a little bit, and I think the right way to look at it today would be that it's a little over 25% of our total sales this year. And in terms of the composition of the backlog, if what you're referring to is, the China part of the backlog, I guess, that’s what your question is, I think that the China part in the backlog is still in this – around the same number. So it’s still in that 20% to 25% range approximately.
Krish Sankar
Thank you very much, Roger.
Roger Dassen
You’re welcome.
Operator
Thank you. Our next question comes from the line of Joe Quatrochi from Wells Fargo. Please go ahead.
Joe Quatrochi
Yeah. Thanks for taking the questions. One on the tariff front. Can you talk about just what your customer conversations have been like over the last couple of weeks? Is there any interest in altering delivery schedules? And just kind of, how do we think about your [Technical Difficulty] times in the context of the ability to like pull shipments in to kind of elude some of the tariffs?
Christophe Fouquet
Well, maybe I can start, and then Roger will add. But I think the short summary of our customer conversations so far, I think that the announcement of tariffs have not changed the business conversation we have with our customers. So that's the first point. The second point, I think the level of uncertainty we shared in the introduction, which, of course, as the results of the many announcement we have seen in a very short time, I think that uncertainty is also with our customers and with our suppliers. So a lot of people are still trying to understand exactly what it means for them. And I think in some way, we start to try to do that together, but that's extremely preliminary. And I will say, again, once more that, so far, those discussions have not changed fundamentally the business planning or the business discussions we have been having with our customers.
Roger Dassen
Because fundamentally, I mean, it's even impossible for a number of customers to do what we're suggesting here, because, of course, to a very large extent, what is gating what customers is space right? So they need to have fabs to put tools into. And at least for a number of customers, that is the number one gating item, so it would even be impossible to opportunistically just pull in system. That's not the way for us.
Joe Quatrochi
Yeah. No, that makes sense. I appreciate the color. And then you talked about the 3800 Low NA becoming the main tool for your system shipments now. Can you remind us, did you -- how many of the 3600 are still left that you prebuilt, I think, last year in inventory? Is there anything that we should think about like, in terms of the salability of those tools or can you upgrade some of those tools to be closer to the productivity of the 3800 to sell?
Roger Dassen
Yeah. We have no concerns actually on the ability to sell the 3600. So that's -- the 3600s, the number of that prebuilds, you will see that come down this year, and there is no concern around the ability for us to sell the remaining 3600s that we even build – that we built or are in the process of building. No concern there.
Joe Quatrochi
Perfect. Thank you.
Operator
Thank you. Your next question comes from the line of Didier Scemama from Bank of America. Please go ahead.
Didier Scemama
Yeah. Good afternoon and thank you for taking my question. I just wanted to make sure I get everything right. So I think if you look at the blended ASPs of your Low NA EUV, I think it came in at about EUR230 million. If I do the math correctly, also on your gross margin, it looks like your EUV gross margins were at about 55%. So my question is, is that correct? And I've got a quick follow-up, especially, if you could talk about whether there are any one-off or exceptional -- I think you talked about upgrades, whether that came into the ASP, the gross margin or in IBM or in all elements? Thank you.
Roger Dassen
So you're right on your calculation of the ASP, it is indeed close to EUR230 million. I think it's EUR227 million, is the number on the ASP. That's -- as we said, it's a little on the high side given composition of 3800, 3600, also configuration, etc. But I do believe on a go-forward basis, I think a blended rate a little bit below that point. So blended rate of around EUR220 million is probably the right number to have in your models as a blended rate for Low NA. When it comes to the gross margin, we don't disclose that on a product-by-product basis. But I think we said in the past that the gross margin on Low NA is clearly now above the corporate gross margin. So that's clearly the case, but we're not separately disclosing that.
Didier Scemama
Got it. And on China, I just wanted to also get a bit of color. So you said that from the previous guide of the low 20% of group revenues, you think China is going to be a bit above 25%. So can you talk about what's changed there? And also, if you could maybe, within that, give us a sense of what's your directional guidance would be on China IBM revenues because, obviously, there's been restriction on maintenance and services on the disposing fabs. So just wanted to understand what you've provisioned for that IBM revenues in '25. Thank you.
Roger Dassen
Yeah. So Didier, when it comes to a few percentage point changes, I think we should recognize that you're looking at a couple of hundred million, right? So we're not looking at huge shifts. We're looking at couple of hundred million shifts, which I think is normal business dynamics that you have a shift like that. So I think what you notice is that the demand in China is still strong. And if you then look at where is the demand strong, it is still strong particularly in the mainstream business, that's where the demand continues to be very strong. And that is on the back of the demand for mainstream chips in China, both for domestic consumption but also for what China exports to the rest of the world. So that demand is still resilient and, in fact, a bit better than what we anticipated three months ago or six months ago.
Didier Scemama
Got it. Thank you so much.
Roger Dassen
You’re welcome.
Operator
Thank you. Your next question comes from the line of Alexander Duval from Goldman Sachs. Please go ahead.
Alexander Duval
Yes. Hi, everyone. Thanks very much for the question. Firstly, there were some reports mid-quarter talking about China being close to develop its own alternative to EUV lithography tools. I wondered if you could just share your latest view on those and to what extent those really have sufficient scalability, reliability and so on. And secondly, you talked today about AI demand solidifying, if I heard well in your prepared remarks. We saw NVIDIA at its GTC event talk about increasing inferencing and reasoning models, driving more semis demand. I wondered if that could be something that could impact your long-term TAM expectation in a positive way.
Many thanks.
Christophe Fouquet
Okay. I'll take the easy question on the EUV China. I think there is nothing really new there. I think that we expect to continue to see news here and there on some progress with regards to EUV in China. And I think this is mostly driven by a strong wish, I think, from China to have this tool and to display some progress. If you look at the fundamental even if you look at what has been shown, we have seen some pictures, I think that I would consider that as research news more than product yields, and therefore, of course, it's always possible to generate some EUV light, it may even be possible to have an EUV mirror here and there. But in no way, this is enough proof that there is a serious product on the way. So I think we are still on the same view that it will take many, many years for China to be able to make an EUV machine.
And again, you should expect some more news because I think that's just what you do when you want to show progress.
Roger Dassen
And on the, Alexander, on the AI demand, I think the comment that Christophe made on that, I think is a comment in general. So what we hear from customers, both on the logic side and on the memory side is that they still see that strong demand there. I think the point that you make is right, I think there has been a lot of emphasis in the past quarters on the training side of life. I think more and more, which I think is logical, that you also see more and more emphasis being put on the inferencing side of the equation. So I think you will see the inferencing part becoming a larger component of AI demand on a go forward basis. So I think you will continue to see that develop.
Alexander Duval
Thank you very much.
Operator
Thank you. Your next question comes from the line of Chris Caso from Wolfe Research. Please go ahead.
Chris Caso
Yeah. Thank you. Good morning. I guess first question would be on gross margins, and you have provided a wider range for Q2, taking into consideration some of the tariff impact. But speaking for the full year, what are the expectations there? What sort of direct tariff impact are you expecting in the gross margins? And what goes into the thinking with regard to the gross margin for the full year?
Roger Dassen
Yeah, Chris. As we have said on the video, it's very hard, given the dynamics around tariffs to put any meaningful number on there, right? Because on the one hand, the question is what tariff will eventually -- what tariffs are eventually going to look at, in general, from one region to the other. But then more specifically, when it comes to semiconductors, it's pretty clear that is still under review by the U.S. government. So it's impossible to see what, as I mentioned before, what the size of the tariffs is actually going to be. And then the second question, to the extent that that is clear, the question is how will that ultimately be absorbed in the entire value chain. And we've made it clear also on the video that we're working very closely with everyone involved to try and minimize the total exposure of the ecosystem to tariffs.
So we try to see what we can do to minimize the overall impact. But we also believe that once that has been minimized, that the burden of that should not be with ASML, that the burden of the tariff, that the lion's share of the tariff burden should be borne by the next element in the value chain. I think that's the way we approach it. But there is still so much uncertainty out there that to make any judgment what impact that is going to have on the full year is absolutely impossible. The reason that we put it into the quarter that, we said in the quarter, we have a wider bandwidth, is that, obviously, the timeframe there is a bit shorter, that allows you to try and include the impact into the quarter. But for the full year, it's impossible to put a number on it.
Chris Caso
Understood. That's helpful. If I could ask my follow-up, a bit of a bigger picture question. And there's been a school of thought that if we need to diversify the geographic location of fabs going forward, if we're going to produce more in the U.S., if produce more in China, then that's ultimately good for WFE spending. And it would seem that the current tariff situation would at least advance that narrative. I'm just interested in your latest thinking with regard to that and sort of geographic diversity and the effect on your business and perhaps some of the conversations you may have had with customers with that regard.
Roger Dassen
I think that notion on the one hand still holds. So I think the notion that having dispersed fabs across the globe in all likelihood will drive to, ultimately, to more capacity having to be installed in order to still be able to drive the same number of wafers. So there will be a heightened level of inefficiency in there. I think you actually see that now in the entire value chain. You see it in semiconductor manufacturing. You see it in discussions on data centers being spread across multiple continents more so than has been considered so far. So I think this whole notion of having a more dispersed nature within our ecosystem, you see that in multiple basis. Eventually, I think that will drive up the demand for semiconductor for wafers.
And then to the extent that those wafers are made in different places, I think that will drive that up. So there is a potentially positive element in that. But as Christophe very clearly said it in the video and also in the call at the beginning, the uncertainty that we’re currently having on tariffs is a dimension that we also have to consider there. So I think it’s a story of puts and takes.
Chris Caso
Okay. Thank you.
Operator
Thank you. Your next question comes from the line of Mehdi Hosseini from Susquehanna. Please go ahead.
Mehdi Hosseini
Yes. Thanks for taking my question, and I do have two. Starting with the NXE platform. Christophe, can you remind us what are the key milestones as we go from R&D NXE
Christophe Fouquet
Yeah. I'll try to do it again quickly. So I think we usually talk about three phases. And the first phase is, [indiscernible] for our customer is to receive first tool or use the tool we have in the lab in ASML to test the technology. It's a completely new technology, new imaging, new performance. So they use basically this time to really validating some way that the design of the technology deliver what they had in mind. And this is done with R&D tools. So this is why we had the EXE
Mehdi Hosseini
I see. And given that your earlier comment that focus on key takeaways -- I'm sorry. Given your earlier comment that has to do with the key takeaways from SPIE conference in February, it seems like advanced logic would be the first adopter and then there's a debate as to what happens to foundry versus DRAM as the second type of adopter for these High NA technology?
Christophe Fouquet
Well, I think it's hard to say because, to be honest, we said it in the past, the timing is very close. And when we refer to the to the three customers, when we referred in the past the customer having access to our lab, this is really covering both logic and memory customers. And I would say both logic and memory customers have good reason to use High NA as soon as the maturity of the tool and, therefore, the cost of technology and the tool will be there. So to be honest, yeah, historically, we always expect logic to be first. It could be the case that it’s a very close call. So I will not make a bet today. But both memory and logic customers are really working hard to qualify the tool.
Mehdi Hosseini
Got it. Thank you.
Christophe Fouquet
You’re welcome.
Operator
Thank you. Your next question comes from the line of Tammy Qiu from Berenberg. Please go ahead.
Tammy Qiu
Hi. Thank you for taking my question. So first one is on China. So my understanding is your customer list has been -- keep expanding in China. Can you share if your percentage of China revenue from the Big 4 chipmakers have been decreasing over time or not really changed?
Christophe Fouquet
Percentage of the…
Roger Dassen
Big 4.
Tammy Qiu
Big 4 from China.
Roger Dassen
Okay. Over time, that has decreased. Over time, that has decreased. Big 4, you mean the -- sorry, you mean the domestic ones. All right. Sorry.
Tammy Qiu
Domestic ones. Yes, domestic ones.
Roger Dassen
The sale in China has definitely become longer, right? So the number of players have become longer, that's for sure. But still a significant part of the shipments into China go to the large players. The sale has definitely become longer, but the number of tools that a sale takes is obviously smaller. So there is still quite a big part of the China sales going to the large players.
Tammy Qiu
Okay. I see. Okay. That's clear. And also, currently, your best DEEP UV tools with China is 1970i, 1980i. So assuming you can only ship 1950 or below, can China still make 28-nanometer from a technical perspective using multi-patterning based on 1950 or 1940?
Christophe Fouquet
Yeah. 28-nanometer for sure. I think that this has been done in the past by other customers. So I think, yes, if you go back in history, when 28-nanometer was run by some of the non-Chinese customers, these were the tools basically we were looking at. So it's definitely possible, I would say. Even smaller technology can be run with those two.
Tammy Qiu
Okay. Thank you.
Operator
Thank you. Your next question comes from the line of Timm Schulze-Melander from Redburn Atlantic. Please go ahead.
Timm Schulze-Melander
All right. Thanks very much for taking my questions. Maybe just two quick ones. You commented on the gross margin guide for the coming quarter. Just in terms of the order backlog, could you give us some color what proportion is priced ex works? And maybe what proportion of the backlog is ASML responsible for custom fees, delivery duty paid, etc.?
Roger Dassen
In general, well, it depends from one country to the other, right, exactly how it works. But in general, we are the importers into the country. But of course, that is actually a bit irrelevant because, at the end of the day, it depends on the contractual agreements that we have with the customers how you pass on the -- how you pass on tariff increases there. And as I mentioned before, we believe that the cost of tariffs are going to give, we believe, that we should not -- we should not be the bear of that. There should be a fair allocation of that burden within the value chain.
Timm Schulze-Melander
Very clear. And then just a follow-up. You talked about the NXE
Roger Dassen
We also expect 5200 rev rec in the year. Because remember, we said we are expecting five rev recs this year. We had two rev recs last year. And in total, as you know, we have five tools -- five 5000s, that we ship to customers. So that tells you that in the five that we talked about before for rev rec this year, there’s also 5200 in there.
Timm Schulze-Melander
Thank you very much.
Operator
Thank you. Your next question comes from the line of C.J. Muse from Cantor Fitzgerald. Please go ahead.
C.J. Muse
Yeah. Good morning. Good afternoon. Thank you for taking the question. I guess there's obviously greater uncertainty around geopolitics. But in Q1, NVIDIA will surpass Apple as the number one customer at TSMC. And it's a very important milestone for HBC surpassing mobility. So with that as the backdrop, would love to hear the visibility you have today, the conversations you're having with your customers today as it pertains to 2026, 2027?
Christophe Fouquet
Well, I think maybe I'll answer the first part on your comment. I think Roger said it already, I think – mostly I said it as well. I think the demand on AI is still very strong, and I think this has been confirmed by some of our customers, I think, by some of our customers' customers. Because when it comes to AI, at least in the next couple of years, you are looking at major investment basically and that's why your reference to HBC is the right one. So because you are looking at major investment, investment has been committed, investment that a lot of companies believe they have to make in order to basically enter this AI race. I think the threshold to change its behavior is pretty high. And this is why -- this is what our customers are telling us. And that's also why we mentioned that, based on those conversations, we still see '25, '26 as growth years, largely driven by AI and by that dynamic.
Now '27 starts to be a bit further away, so you're asking us too much, I think to be able to answer basically what AI may look like in ‘27. But if you look at the next couple of years, so far, the commitment to the AI investments and, therefore, the commitment also to deliver the chips very high has been very solid.
C.J. Muse
Great. Very helpful. I guess as a follow-up, and I guess to follow up on a prior question. At Capital Markets Day, the theme of replacing double-pattern with a single EUV step was a major focus. But my impression then was that there was real work to be done in terms of the throughput on EUV to do that. But given your commentary today in the video and on this call, it certainly sounds like that progression is happening sooner. So can you kind of speak to when you see that occurring? I believe you're talking about it happening first in DRAM, but would love to hear kind of how you see that playing out this year, next, and how we should be thinking about the overall implications to litho intensity.
Thanks so much.
Christophe Fouquet
Yeah. I think I tried to explain that to Francois before. I think we will see that gradually. So I think, yes, it's a lot of work. But every step we make on productivity, every step we make also on the, I would say, maturity, the efficiency of the tool of our customer, bring basically the cost of technology of Low NA EUV down. And as I said a few times already today, single expose is so much better for our customer than multi-patterning when it comes to complexity, cycle time, etc., that the minute we are going to match basically the cost of multi-patterning with single expose, most really the customer will move. So we'll see that gradually, that's also why at the Capital Markets Day we showed basically that we expect every node both for DRAM and logic to bring more EUV layers. I think it's a bit more maybe spectacular on DRAM just because the number of multi-patterning in DRAM today is still higher than it is for logic.
So this is where we see on the short term the -- maybe the fastest progress. But this is something we will experience for the few years to come.
C.J. Muse
Thanks so much.
Operator
Thank you.
Christophe Fouquet
You’re welcome.
Operator
Your next question comes from the line of Stephane Houri from ODDO BHF. Please go ahead.
Stephane Houri
Yes. Good afternoon, everyone. I have a first question about the order volatility and maybe to – come to understand better from you, if you think that the uncertainty around the tariffs in Q1 already had an impact on your orders or not at all. And the second question is about the coverage of the middle of the range for 2025. Basically, last quarter, you said that your middle of the range was covered for EUV. So the follow-up question is, what about the EUV, which is supposed to grow pretty strongly, notably out of China? Thank you.
Roger Dassen
So let's start with that question. So you're right, we said last time that for the midpoint of the range, we are fully covered with EUV. For the midpoint of the range, when it comes to DEEP UV, we're covered approximately 90%. So nearly there, which given order lead times, I think it's a very good place to be in. Back to your first question, order volatility. I think we go back to what we said about that before. I think order volatility and the lumpiness of order intake is what we've seen, not just in this environment, but what we've seen for the past couple of years. And that is, I think, first and foremost, driven by the fact that a customer that puts in a very, very significant order in one quarter has to go through a lot of governance steps in order to get that order approved and is, therefore, unlikely to then, the quarter after come back.
So to the extent that you have major order intake as we had it, for instance, in Q4, that has a bearing on the order intake in the quarter graph. I think that's erratic pattern I think we've seen in the past couple of years. So that's why we said, it is not necessarily a good proxy for the business momentum. And so therefore, I think that’s what you’re looking at here, much rather than customers taking already a view on what tariff means for their business. I don’t think you can read that from this order book.
Stephane Houri
Okay. Understood. Thank you very much.
Roger Dassen
You’re welcome.
Operator
Thank you. Your next question comes from the line of Andrew Gardiner from Citi. Please go ahead.
Andrew Gardiner
Thank you very much for taking the question. Another one on tariffs. I wanted to take the conversation in a slightly different direction. On one hand, the U.S. government is trying to encourage reassuring of semiconductor manufacturing in the U.S. and yet in achieving some of those goals, particularly with TSMC and a quite high profile announcement earlier this year, they're now turning around and saying, well, yeah, we'd like you to do that, but we're also going to flat tariffs on some of the tools that you need in order to make that happen. Does strike me as at least a little bit inconsistent. I was wondering about your position on that in Washington and perhaps, even more importantly, the position of your customers.
I can imagine that they're not too pleased by it. I was just wondering whether -- how can the industry sort of push back or explain that there is no U.S. litho industry, that ship sailed over 40 years ago, and really we need these tools and we need some relief under this. It just doesn't make sense. Are those arguments being made? Is it too sensitive a topic to be made? Where are we on that? Thank you.
Roger Dassen
Well, I think, Andrew, we understand your comments. It's not the first time we hear it. And that might be the reason why, as you know, since a couple of days, this industry or a significant part of the products within this industry are now not put on -- are now exempt from tariffs. But at the same time, U.S. administration has also said, we're reviewing the entire ecosystem to figure out how to deal with this. I think it is this complexity that is being recognized. I think it's being recognized by players such as ourselves. I think it's being recognized by customers, I think is being recognized by the U.S.
administration. And that's why I think they've said they need a bit more time to understand how to do this and how they can achieve the objective with more onshoring of chip manufacturing in the United States, and how they can reconcile that with this. I think that's the background of the of the delay that we now see and of the anticipated and announced review of this ecosystem.
Andrew Gardiner
Okay. Understood. Thank you. And just a quick follow-up on the High NA commentary, Christophe, you've talked about the different phases. Clearly, your book, you've had sort of long-term backlog to achieve phase one. Would you say that phase two is also represented in the backlog, and therefore, really incremental orders that come are only necessary for the phase three, sort of '27, '28 production ramp?
Christophe Fouquet
Yeah. I think we discussed that last quarter. I think we mentioned several times that we have double-digit booking for High NA. So that's definitely enough to cover basically both phase one and phase two. And the order for phase three, I would say, come -- will come when the level of confidence has achieved a place where the tool will be for sure used in HVM. So mostly, we still have a few months to go before we see that happening.
Andrew Gardiner
Thank you very much.
Christophe Fouquet
Welcome.
Jim Kavanagh
Okay. So we have time for one last question. If you were unable to get through on this call and still have questions, please feel free to contact ASML Investor Relations with your question. Now operator, may we have the last caller, please?
Operator
Thank you. Your final question for today comes from the line of Sandeep Deshpande from JPMorgan.
Sandeep Deshpande
Yeah. Hi. Thanks for squeezing me in. My question is, at this time, in April 2024, how was your order book and backlog looking for 2025? And how does the order book and backlog for 2026 look at this time of the year versus 2024?
Roger Dassen
Goodness me, Sandeep. I'm not into the history lesson here. I think I made a comment at the -- at sort of one of the earlier questions. I think it's not too difficult, I think, to figure out where our order book is for this -- our total order book is. And I also believe it's not too difficult to figure out what the component is at the midpoint of demand beyond 2026. I think you're able to figure that out. And then you will see that there is quite some orders already in there for the period beyond 2025. So I think there is a really good start for the year '26, but we refrain from making any further comments on what we think 2026 looks like.
And we also refrain from saying, and therefore, this is exactly the number that you need for next year. I think we've indicated how we look at bookings. And therefore, I think it would not be appropriate for us to give further commentary on what bookings you still need in order to get to that whatever midpoint is for 2026.
Sandeep Deshpande
Thank you. And my quick follow-up, to Christophe on High NA. You talked about the phase three. Do you expect to start getting these phase three High NA orders by the end of this year or the second half of this year?
Christophe Fouquet
Not too many. We could have a few, but I think that's still too early because, remember, we're still mostly in phase one, we're still installing some of the tools. So this will mostly take some more time.
Sandeep Deshpande
Okay. Thank you.
Christophe Fouquet
You’re welcome.
Jim Kavanagh
Okay. On behalf of ASML, I would like to thank you all for joining us today. Operator, if you could formally conclude the call, I would much appreciate it. Thank you.
Operator
Thank you. This concludes the ASML 2025 first quarter financial results conference call. Thank you for participating. You may now disconnect.